The Avanti Hammer-E LT1 in Black is a German-engineered electric trail bike with 160 mm of fork travel and 150 mm at the rear. A Bosch Gen 4 Performance Line CX motor provides assistance up to 25 km/h in Australia, with a 500 Wh battery hidden inside the ultralight alloy frame. Small frames use 27.5-inch wheels for a lower standover, while medium, large and extra-large roll on 29-inch wheels. A RockShox 35 Silver TK Solo Air fork and a Deluxe Select R DebonAir shock handle the terrain, SRAM SX Eagle 12-speed shifting drives a 34-tooth FSA chainring and an 11–50T cassette, and Shimano MT420 four-piston brakes with 203 mm rotors bring the bike back down. A Syncros Duncan dropper is internally routed, and Kenda Regolith 2.6 inch tyres are tubeless-ready.
| Component | Specification |
|---|---|
| Colour | Black |
| Sizes | S, M, L, XL |
| Frame | AL-6061 ultralight alloy, 150 mm travel, cartridge-bearing pivots, 1.5 inch tapered head tube, internal PowerTube battery |
| Fork | RockShox 35 Silver TK Solo Air, 160 mm, rebound adjust, lockout, Boost 15 × 110 mm (27.5-inch on S, 29-inch on M–XL) |
| Rear Shock | RockShox Deluxe Select R DebonAir, rebound adjust |
| Rear Derailleur | SRAM SX Eagle, 12-speed |
| Shifters | SRAM SX Eagle, 12-speed |
| Crankset | FSA Gen 4 Bosch ISIS, 34T SRAM X-Sync |
| Chain | SRAM SX Eagle |
| Cassette | SRAM PG-1210, 11–50T, 12-speed |
| Brakes | Shimano MT420 hydraulic disc, four-piston |
| Rotors | 203 mm |
| Grips | Syncros lock-on |
| Handlebar | Syncros Hixon 2.0, 31.8 mm, 12 mm rise, 9° sweep |
| Seatpost | Syncros Duncan dropper, 31.6 mm, internal cable routing |
| Saddle | Syncros ER 2.5 |
| Headset | Integrated threadless, 1-1/8–1.5 inch, with a geometry-adjust cup for 27.5+ |
| Wheelset | Tubeless-ready double-wall alloy, 32-hole, Shimano MT400 Boost hubs (15 × 110 mm front, 12 × 148 mm rear) |
| Tyres | Kenda Regolith 2.6 inch, 120 tpi, folding, SCT tubeless-ready (29-inch on M–XL, 27.5-inch on S) |
| Extras | Bosch Gen 4 Performance Line CX motor, 500 Wh internal PowerTube battery |
✅ You want a long-travel e-MTB: 160 mm front and 150 mm rear, with Bosch CX assist up to 25 km/h in Australia.
✅ You want a wide-range 12-speed and a dropper: SRAM Eagle 11–50T and a Syncros Duncan post.
✅ You want four-piston brakes: Shimano MT420 calipers with 203 mm rotors.
❌ You want a hardtail e-MTB: This is a full-suspension trail e-bike.
❌ You need assistance above 25 km/h in Australia: Australian assist is limited to 25 km/h.
❌ You want a lighter unassisted trail bike: The motor and 500 Wh battery add the weight of an e-bike.
For safety reasons bikes can not be shipped fully assembled and must be built by a qualified mechanic or experienced individual before riding.