The BHP-42 is an integrated headset for a straight 1-1/8 inch fork, with 41.8 mm, 45° × 45° sealed CrMo bearings that sit directly in a 42 mm head tube (IS42/28.6 upper, IS42/30 lower). There are no cups between the bearings and the frame.
A 15 mm cone spacer, 46 mm in diameter, and an open crown race are included, which makes the race easier to fit over the steerer. The headset weighs 84 g.
✅ You need a straight 1-1/8 inch integrated headset in 41.8 mm, 45° × 45°: The BHP-42 is made for that size.
✅ You want sealed CrMo bearings with a 15 mm cone spacer: An open crown race is included.
❌ Your frame is tapered, or your upper seat is a different diameter or angle: A tapered headset, or a different bearing size, is required.
Clean the frame seats, fit the bearings the right way up, and set the headset so it turns smoothly before you fully tighten the stem. Recheck it after the first few rides, as new bearings can bed in a little.