This is the ramped Dirtsurfer mudguard in the Speedgrid print, a fast geometric pattern used across several colourways. It zip-ties to the fork and is made to keep mud and water off your face and fork seals.
It is an Australian-made Dirtsurfer, formed from a carbon-neutral polypropylene sheet with a 50% recycled and 50% virgin mix, and it can be recycled at the end of its life. At 28 g it is a light way to protect your face and your fork seals and stanchions. It suits 29, 27.5 and 26 inch mountain bikes, and has been used on 20 inch wheels too. Four zip ties hold it to the fork.
✅ You want a light, Australian-made ramped fork mudguard: A 28 g ramped Dirtsurfer, made here and recyclable.
✅ You like this artwork on the front of the bike: This is the ramped guard in that print.
❌ You want a long, stay-mounted road or gravel guard: This is a short zip-tie fork guard for mountain bikes.
❌ You do not want to attach a guard with zip ties: Four zip ties are how this one mounts.
Use all four zip ties, snug them evenly without crushing the guard or the fork, trim the tails so they cannot catch, and check them after the first muddy ride.