The Enduro Stainless Steel Angular Contact Bearing represents the highest level of protection for your bike's steering system. Specifically designed for the 1.5" lower headset position common on modern tapered forks, this bearing is crafted from 440C Stainless Steel. While standard bearings eventually succumb to the "notchy" feel caused by rust and grit, the stainless steel construction remains completely impervious to the corrosive effects of rain, road salt, and the perspiration associated with intense indoor training sessions.
This specific model features a hybrid 36° internal and 45° external chamfer. This precise geometry is engineered to mate perfectly with specific high-performance frame and crown race standards, ensuring that steering forces are distributed evenly across the polished stainless tracks. With its dual-lip seals and marine-grade grease, this is the ultimate "fit-and-forget" component for riders who demand consistent, buttery-smooth steering in all weather conditions.
440C Stainless Steel Construction: Forged and precision-machined for total resistance to corrosion, ensuring your bearings won't seize or pit even in the wettest environments.
36° x 45° Hybrid Geometry: Engineered with a 36-degree internal angle and a 45-degree external angle to meet specific manufacturer headset specifications for a perfect, play-free fit.
Mirror-Polished Internal Races: The stainless steel tracks are polished to a high-gloss finish, providing an incredibly light and responsive steering feel.
Dual-Lip Labyrinth Seals: Features heavy-duty, high-contact seals that create a redundant barrier against water ingress while locking in essential lubrication.
High-Fill Marine Grease: Pre-packed with specialized waterproof grease that maintains its viscosity and stays in place under high-vibration and high-torque loads.
Integrated Performance: Designed to handle the high leverage forces exerted on the lower headset of modern gravel, road, and mountain bikes.
| Feature | Specification |
| Dimensions | 40mm (ID) x 52mm (OD) x 6.5mm (W) |
| Material | 440C Stainless Steel |
| Contact Angle | 36° Internal / 45° External |
| Bearing Type | Angular Contact (ACB) |
| Seals | Dual-Lip High-Contact |
| Compatibility | 1.5" Tapered Steerer Tubes / Integrated Headsets |
Coastal & All-Weather Riders: If you live near the ocean or ride year-round, the stainless steel construction is the only way to guarantee your steering stays smooth through the seasons.
Indoor Training Specialists: The ultimate defense against "sweat corrosion," which is the leading cause of headset failure in bikes used on stationary trainers.
Endurance & Bikepacking: Ideal for long-distance adventures where reliability is paramount and maintenance opportunities are few and far between.
Standard 45° x 45° Frames: This bearing uses a specific 36° internal angle. If your crown race is designed for a 45° angle, this bearing will not seat correctly and will lead to accelerated wear or fork damage.
Lightweight Racing Builds: While incredibly durable, stainless steel is slightly heavier than ceramic. For weight-restricted hill-climb builds, you may prefer an Enduro Ceramic option.
The 36° x 45° configuration is a very specific fitment. Always double-check the laser-etched markings on your existing bearing before installation to ensure the angles match perfectly. When installing, apply a generous amount of waterproof assembly grease to the chamfered edges and the head tube seat. This creates a "hydrostatic seal" that prevents water from pooling around the bearing and stops the annoying "creaking" often associated with carbon frames. Since this is a stainless bearing, it is extremely hard—make sure your headset is properly preloaded (just until the play disappears) to enjoy that signature "new bike" feel for years!
