The Equalizer is Funn's reversible stem: bolt it on one way up for 10 mm of rise, or flip it for 10 mm of drop. That is 20 mm of bar-height range from the same part, without stacking headset spacers that also push the bar away from you. This version has a 31.8 mm bar clamp and a 42 mm length, and it weighs 147 g.
It is fully CNC-machined from AL6061, with a 34 mm stack height, a 1-1/8 inch steerer clamp and a wide faceplate that needs at least 55 mm of straight section on the bar. Spare faceplates are sold separately if you want to change the colour later.
✅ You want to tune bar height without spacers: One stem gives 10 mm of rise or 10 mm of drop, just by flipping it.
✅ You run a 31.8 mm bar and like a 42 mm length: That is the exact size of this Equalizer, at 147 g.
❌ Your handlebar is 35 mm: This is the 31.8 mm Equalizer; the 35 mm clamp is a separate version.
❌ You already know you want zero rise: The Equalizer Zero is the same stem with the rise taken out.
Whether you run it in rise or drop, the 'No Gap' marking must finish on the upper side of the stem. Tighten the faceplate to 6 Nm with no gap between the plate and the body, and try both positions before you commit to a cockpit height.