This is the Duncan Dropper 1.5 in 31.6 mm, with 150 mm of infinite travel, not the older Dropper 2.0 that only offered 125 mm. The post is 7050 aluminium, 438 mm long, with a 10 mm offset, and Syncros lists it at 517 g. Internal cable routing and a shorter actuator than the 2.0 are used to reduce the insertion length, so it can fit more trail and enduro frames.
Travel is infinite, so you can stop the saddle anywhere in the 150 mm range with the bar-mounted remote, which is included. The post is cable-operated. The head accepts 7 x 7 mm through to 7 x 9 mm saddle rails, so metal and many carbon-rail saddles can be fitted.
It is a 31.6 mm dropper only; it will not fit a 30.9 mm or 34.9 mm seat tube without the correct shim, and a shim is not included. Check that the frame has internal dropper routing, enough insertion depth for a 438 mm, 150 mm-travel post, and that 31.6 mm is the seat-tube size.
✅ Your frame takes a 31.6 mm internally routed dropper, and you want 150 mm of travel: This 1.5 is 438 mm long, with a 10 mm offset, at 517 g.
✅ You want infinite travel and a bar lever in the box: The cable-operated remote is included.
✅ You need less insertion length than the older Dropper 2.0: The 1.5 uses a shorter actuator for that reason.
✅ Your saddle uses 7 x 7 mm or 7 x 9 mm rails: Both are compatible with this head.
❌ Your seat tube is 30.9 mm or 34.9 mm, or the frame has only external routing: This post is 31.6 mm, with internal cable routing.
❌ You wanted 125 mm of travel, or the older Dropper 2.0: This 1.5 is the 150 mm-travel post.
❌ You needed a wireless or 1x electronic dropper: This is a cable-operated post.
Measure the seat-tube internal diameter and the maximum insertion before you buy. Route the cable internally, bleed or tension it to the Syncros figure so the post returns fully, and check 150 mm of travel will not leave the post too long for your frame.