The DualPressure is a compact pump for setting both your tyres and your suspension. A high- and low-pressure mode lets you fill a tyre or add small amounts of air to a fork or shock, and a fine-adjust bleed valve helps you sneak the pressure back down to the figure you want.
The 1.5-inch analogue gauge sits in a rubber housing so it is easier to read and a little better protected. A TwistHead and hose screw onto Presta or Schrader valves, the barrel is telescopic aluminium, and there is a dust cover. Maximum pressure is 21 bar or 300 psi. The pump weighs 206 g and does not include a frame bracket.
✅ You want one pump for tyres and suspension: High- and low-pressure modes, a gauge and a bleed valve cover both jobs.
✅ You like a screw-on head with a hose: The TwistHead stays on the valve while you pump.
❌ You only need a simple tyre mini pump, or you want a pump that mounts on the frame: This is a 206 g combo pump with no bracket.
Use the low-pressure mode and the bleed valve for forks and shocks, and always check the final figure on the gauge after you disconnect. Keep the dust cover on so grit stays out of the head.