A derailleur hanging below the chainstay is an easy thing to hook on a rock, a root or a stray branch. Branchy Original is a compact thermoplastic blade that sits beside the drivetrain and is designed to deflect those hits, which can also help spare the hanger and nearby spokes. It weighs about 38 g and measures 140 x 60 x 100 mm.
It mounts with 3M double-sided tape on the upper face and three flat-head polyamide cable ties around the chainstay. Put the bike in the lowest cog, leave at least 2 cm between the derailleur and the inner face of the blade, then check that the chain, wheel and derailleur can move freely before you tighten and trim the ties. It is made for a wide range of hardtail and full-suspension bikes, but fit depends on the chainstay shape and the clearance you have, not on the brand alone. The material is made to resist UV, oil and grease.
✅ You ride trails or gravel and want a light derailleur guard: Original is the lighter, more flexible Branchy, at about 38 g.
✅ Your chainstay has room for the blade with 2 cm of derailleur clearance: That gap is the starting point for a correct fit.
✅ You want a simple tape-and-tie installation: No frame bosses are required.
❌ You want the sturdier Branchy HD for enduro, downhill or e-MTB: Original is the lighter, more flexible model, not the Heavy Duty version.
❌ Your chainstay is an unusual shape with no clear mounting face: Fit depends on the stay and on clearance, not on the bike brand alone.
Install it in the lowest cog, leave at least 2 cm of clearance to the derailleur, and spin the wheel and run through the gears before you trim the ties. Check the ties from time to time, as they can settle in.