ENVY SECTOR SCOOTER WHEEL 120MM COPPER / BLACK

The Envy Sector 120mm Scooter Wheel reimagines aftermarket park performance for riders ready to level up their trick progression. Dropping straight out of the Envy aftermarket catalogue (and featured on their premium PX One completes), these wheels bring a taller 120mm diameter to your setup.This extra height raises your total deck clearance, significantly lowering the risk of bottoming out or scraping your deck plates when locking into deep grinds or coping tricks.

Engineered with clever proportional sizing, the Sector wheel features a robust 24mm wide 6061 aluminium core paired with a slightly wider 26mm urethane footprint.This intentional design overhang ensures that the high-rebound polyurethane absorbs the brunt of sideways impacts and harsh landings, protecting your premium alloy core from structural damage.

On the pavement, the 86A durometer rating strikes the ultimate balance for high-level park and street riders. It is soft enough to absorb intense landing shock and maintain reliable traction on slick wooden ramps, yet resilient enough to maintain high rolling speeds. Pre-installed with fast-rolling ABEC-9 bearings, this stunning metallic copper and black colourway swaps out sluggish factory wheels for a setup engineered for serious airtime.

Key Features

• 120mm Tall Profile: Provides increased ground clearance that prevents deck scraping and delivers higher rolling speeds per push.

• Core-Protecting 26mm Urethane: The 26mm wide polyurethane sits wider than the 24mm core, absorbing side impacts to save your alloy rims from damage.

• Premium 6061 Aluminium Core: Crafted from high-grade aircraft aluminium to deliver exceptional strength during hard vertical drops.

• 86A Durometer High-Rebound PU: Offers a smooth, shock-absorbing ride with plenty of grip for carving bowls and landing big transitions.

• ABEC-9 Bearings Pre-Installed: High-precision bearings minimise rolling resistance, helping you maintain momentum with less effort.

Specifications

✅ Why This IS For You

• Skatepark Progression: Perfect if you need a wheel that carries massive speed up transitions and offers plenty of grip for deep carving.

• Deck Scraping Issues: Ideal if your current setup frequently catches or bottoms out on the coping during grinds.

• Side-Impact Protection: Great if you want a wider urethane profile that shields the inner alloy rim from gouges and flat spots.

• Wider Deck Riders: An excellent choice if you run a modern deck and want ground clearance without the heavy rotating weight of a full 30mm wide core wheel.

• Out-of-the-Box Speed: Ideal if you want a complete upgrade kit that comes pre-fitted with fast, high-end ABEC-9 bearings.

❌ Why This May NOT Be For You

• Ultra-Lightweight Purists: If you are hyper-focused on keeping your scooter as light as possible, a smaller 110mm wheel will shave off extra grams.

• Micro-Scooter Riders: These wheels will not fit older, entry-level scooters or standard commuter setups that max out at 100mm or 110mm wheel clearance.

• Heavy Street Grinders: If your riding consists entirely of harsh street square rails and rough concrete ledge grinds, a harder 88A+ or full-width 30mm wheel might suit better.

BFC PRO TIP

Because these wheels feature a 26mm wide urethane tyre wrapped around a standard 24mm core, they fit into most standard forks and decks without needing specialised wide-wheel deck spacers. However, before your first ride, double-check your brake alignment. Standard flex fenders are sometimes pressed tight to fit 24mm urethane, and the extra 2mm of the Sector tyre can rub slightly against the inner wall of older brakes. If it rubs, simply slide a small metal washer between the deck wall and the brake arm to give the wheel a completely friction-free spin!