The Ridge is Funn's tough 1x alloy crankset for trail, cross-country and gravel, with forged AL6061 arms and a carbon steel 24 mm axle. This version has 175 mm arms and a 32T CNC AL7075 narrow-wide chainring on a 104 mm BCD, so you can swap rings later without being tied to one brand.
The crank arms weigh 667 g and the 32T ring is 42 g. It is made for 10- to 12-speed drivetrains and fits 68 mm or 73 mm threaded BSA shells, as well as PF92 press-fit frames with the right 24 mm bottom bracket.
An external-cup BSA bottom bracket for 68 mm and 73 mm threaded shells is included in the box. If your frame is PF92, you will need a separate 24 mm press-fit bottom bracket instead of the cups that come with the crank.
✅ You want a tough 1x alloy crankset at a sensible price: Forged arms, a 24 mm axle and a 32T narrow-wide ring, with a BSA BB in the box.
✅ You prefer 175 mm arms: That is the longer Ridge length, with a little more leverage than 170 mm.
✅ You have a 68 mm or 73 mm threaded BSA shell: The included external-cup bottom bracket is for those shells.
❌ You need 170 mm arms, or a 34T or 36T ring: This is the 175 mm x 32T version; the other sizes are separate.
❌ Your frame is PF92 and you were counting on a press-fit BB in the box: The included cups are for threaded BSA shells; a PF92 frame needs a separate 24 mm press-fit BB.
Measure your bottom-bracket shell before you fit the cups — 68 mm and 73 mm look alike until you put a rule across them. If the frame is PF92, set the included BSA cups aside and use a 24 mm press-fit bottom bracket. Check the chainring bolts after the first few rides.