The Stryge Drop tucks the bar down and loads the front wheel, with a -5° angle that gives a lower, more planted position without cutting the steerer. It is forged from AL6061 and sand-blasted. This version has a 35 mm bar clamp and a 75 mm length, with a 40 mm stack and a 1-1/8 inch steerer, and it weighs 190 g.
The stem is symmetrical, so turning it over gives you 5° of rise instead. It needs at least 45 mm of straight section on the handlebar, and it suits trail and cross-country riders who want a longer reach than Funn's short enduro stems.
✅ You want a lower, longer 35 mm trail stem: This 75 mm Stryge Drop is -5° and 190 g.
✅ You like the option to flip it for rise: The stem is symmetrical, so +5° is the other way up.
❌ Your handlebar is 31.8 mm: This is the 35 mm Stryge Drop; a 31.8 mm version is separate.
❌ You want a short enduro stem, or 7° of rise as standard: Funn's shorter stems, or the Stryge Riser, are different products.
Try it in drop first, then flip it if the front end feels too low — you only need to undo the steerer and faceplate bolts. Make sure the bar has at least 45 mm of straight clamp section, and use a torque wrench on both clamps.