The BBT-35 is a dual-sided bottom bracket tool, CNC-machined from aluminium in-house by Park Tool and anodised so the two sides are easy to tell apart. One face fits 12-notch threaded cups with a 48–50 mm major diameter and a 46.3 mm minor diameter, including Praxis Works M30. The other fits 36-notch cups with a 51–53 mm major diameter and a 50.7 mm minor diameter, including Praxis Works M35 and Box Two Oversized M35.
A 3/8-inch square drive lets you use a ratchet or a torque wrench so cups can be tightened to the maker's figure. Park Tool also lists it for Praxis T47 Inboard cups. The two sides have since been split into the separate BBT-35-12 and BBT-35-36 tools, but this dual-sided BBT-35 does both jobs in one piece.
✅ You service Praxis M30 and M35, or similar 12- and 36-notch cups: Both fittings are on this one dual-sided tool.
✅ You want to tighten cups with a torque wrench: The 3/8-inch drive is made for that.
❌ You only ever need one of the two fittings: The single-sided BBT-35-12 or BBT-35-36 may be all you need.
❌ Your cups use a different notch count or diameter: Match the tool face to the cup before you buy.
Confirm whether the cup is 12-notch or 36-notch before you put the tool on, and use a torque wrench on the 3/8-inch drive so the cups are tight without damaging the aluminium tool face.