The Park Tool SKT-6 is a shop-quality set of six flat-faced sockets for the low-profile fittings on suspension-fork top caps. Flat faces are intended to give as much engagement as possible so the socket is less likely to slip on a shallow cap. The set is 3/8-inch drive, for use with a torque wrench or a ratchet handle, and is made from chrome-vanadium steel.
Sizes in the set are 24, 26, 27, 28, 30 and 32 mm. The 27 mm socket is tapered for better access on some Suntour forks. Officially, the set is not designed for impact drivers or other power tools.
✅ You service suspension forks with shallow cap fittings: Flat-faced sockets are made for those low-profile caps.
✅ You want the common sizes in one set: 24 to 32 mm are included, plus a tapered 27 mm.
✅ You work with a 3/8-inch torque wrench: That is the official drive size.
❌ You need an impact-rated socket set: Park Tool says this set is not for impact drivers or power tools.
❌ You only need a single odd size outside 24–32 mm: Those six sizes are the official set.
❌ You wanted a 1/2-inch drive set: This is 3/8-inch drive.
Use a torque wrench at the fork maker’s cap torque, and keep the socket square on the fitting so you do not round a shallow cap. The tapered 27 mm is the one to reach for on a tight Suntour top cap.