The Half Bottle Adapter shifts the cage sideways on a B-RAD base so the bottle sits where you can reach it, and so there is space beside it for a strap mount, pump, tube or tool. It is a common fix on modern trail bikes where the front triangle is tight and a standard in-line cage is hard to access.
The 6061-T6 aluminium bracket weighs 18 g and is rated to 1,700 g. It needs a B-RAD mounting base, and it fits frames with standard 64 mm bottle bosses once that base is fitted. Hardware is T25, tightened to 3 to 4 Nm.
✅ Your bottle is hard to reach in a tight front triangle: The offset puts the cage where you can actually get it out.
✅ You want a bottle and a small accessory on the same bosses: The half-offset leaves room beside the cage.
❌ You do not already have, or plan to buy, a B-RAD base: This adapter will not bolt straight to the frame bosses.
❌ You wanted two full-size bottles side by side: That is the job of the double-bottle adapter.
Pair it with a B-RAD 2 or 3 on a straight tube, or a Dogbone on a curved downtube, and check that the offset bottle still clears the crank and your knees.