The AE is Lewis's four-piston mineral-oil brake with a firmer, more substantial lever feel than the LH series. An axial master cylinder and a one-finger 7075 aluminium lever blade are matched to an integrated, one-piece CNC caliper for a stiffer body and longer service intervals. The lever pivot uses up to four precision bearings.
Asymmetric pistons, two at 14mm and two at 17mm, are designed to spread pad pressure more evenly, help the pads wear more uniformly and give a linear feel at the lever. Reach is adjustable without tools. The calipers are post-mount, and the hose is a 5mm outside-diameter, 2.2mm bore braided line, 90cm at the front and 180cm at the rear, ready to be trimmed to length.
Claimed weight is 112g for the lever and 108g for the caliper, or about 220g per side for lever and caliper. The set is aimed at trail, enduro, XC and downhill use, and is typically supplied with TP-37 metallic pads and mounting hardware.
✅ You want a firm, linear four-piston trail or enduro brake: The AE's lever tune and 14/17mm pistons are aimed at that feel.
✅ You prefer mineral oil and post-mount calipers: The set is a mineral-oil, post-mount system with braided hose.
✅ You want a lighter four-piston option than the AX: Lever and caliper are claimed at 112g and 108g.
✅ You like tool-free reach adjustment: Lever reach can be set without tools.
❌ You wanted the higher-power AX with 18 and 20mm pistons: The AE is the lighter, firmer-feeling four-piston set, not the gravity AX.
❌ You run a DOT-fluid brake system: The AE uses mineral oil.
❌ You need rotors included: Rotors are typically chosen separately to match your mount and size.
Trim the hoses carefully and fit new olives before you bleed with mineral oil. Set the reach so you have a finger's width of clearance at the bar, then bed the pads in with a series of firm stops.