Max Grip, also called Gripper paste, is made for carbon-fibre handlebars, stems and seatposts. A blend of renewable natural oils and ultra-fine pumice particles increases friction between the carbon part and the clamp, so you can hold the component securely without over-tightening.
The 75 g formula is non-toxic, readily biodegradable and resistant to detergents and washout. Apply a thin film to both clamping surfaces with a clean cloth or brush, assemble and tighten to the component maker's instructions, then wipe off any excess.
✅ You are fitting carbon bars, a carbon stem or a carbon seatpost: This paste is made to increase grip at those clamps.
✅ You want a biodegradable assembly paste in a 75 g tub: Max Grip is Peaty's carbon-specific paste in this size.
❌ You needed a bearing or hub grease: Use a grease such as Speed Grease for sealed, fast-moving parts.
❌ You are only assembling metal clamps on metal bars: This paste is made for carbon clamping surfaces.
Clean both surfaces, apply a thin, even film, then tighten immediately to the maker's torque figure. Wipe away any paste that squeezes out, and keep it off brake tracks and pads.