The Park Tool BBT-118 Steel Bottom Bracket / Lockring Tool — 8-Notch is a heavy-duty workshop tool, precision-machined from 4140 steel, for removing and installing components with a 8-notch tool fitting. The body is extra-deep to clear wide spindles, and the walls at the engagement face are low-profile so they can reach a recessed lockring. You can drive it with a 3/8-inch square, a 1-inch hex or 36 mm wrench flats.
Official uses include Shimano Octalink drive-side cups with external notches, ISIS Drive cups including Truvativ and Bontrager, Bosch Gen 3, Gen 4 and Gen 5 e-bike chainring lockrings, and Specialized Levo Brose chainring lockrings. Officially, it is not rated for use with impact drivers.
✅ You need a steel shop tool for this notch pattern: The BBT-118 Steel Bottom Bracket / Lockring Tool — 8-Notch is made for 8-notch fittings in this diameter range.
✅ You want 3/8-inch, hex or 36 mm drive options: All three are on the tool.
✅ You work on seized or frequently serviced cups: 4140 steel and an extra-deep body are made for workshop use.
❌ You wanted an impact-rated tool: Park Tool does not rate this tool for impact drivers.
❌ Your fitting is a different notch count or diameter: Use Park Tool’s bottom-bracket tool finder if you are unsure.
❌ You only needed a lightweight home-workshop cup tool: This is a heavy-duty 4140 steel shop tool.
Confirm the notch count and diameter on the cup before you start, and use a breaker bar or torque wrench rather than an impact driver. For the tools with retaining threads, a BBT-RS retainer or GPS-1 guide pins (sold separately) help keep the tool square on a deep spindle.