The Park Tool BBT-179 Steel Bottom Bracket Tool is a heavy-duty workshop tool, precision-machined from 4140 steel, for removing and installing components with a 12-notch tool fitting. The body is extra-deep to clear wide spindles, and the walls at the engagement face are low-profile so they can reach a recessed lockring. You can drive it with a 3/8-inch square, a 1-inch hex or 36 mm wrench flats.
Official examples include SRAM BSA DUB, Race Face Cinch, Rotor BSA30, Zipp Vuma and others in this 12-notch, 45–47 mm range. Integrated threads accept the Park Tool BBT-RS retaining system or GPS-1 guide pins, sold separately. Officially, it is not rated for use with impact drivers. Internal clearance is 42 mm deep by 30.44 mm diameter, and the outer diameter at the engagement face is 50.04 mm.
✅ You need a steel shop tool for this notch pattern: The BBT-179 Steel Bottom Bracket Tool is made for 12-notch fittings in this diameter range.
✅ You want 3/8-inch, hex or 36 mm drive options: All three are on the tool.
✅ You work on seized or frequently serviced cups: 4140 steel and an extra-deep body are made for workshop use.
❌ You wanted an impact-rated tool: Park Tool does not rate this tool for impact drivers.
❌ Your fitting is a different notch count or diameter: Use Park Tool’s bottom-bracket tool finder if you are unsure.
❌ You only needed a lightweight home-workshop cup tool: This is a heavy-duty 4140 steel shop tool.
Confirm the notch count and diameter on the cup before you start, and use a breaker bar or torque wrench rather than an impact driver. For the tools with retaining threads, a BBT-RS retainer or GPS-1 guide pins (sold separately) help keep the tool square on a deep spindle.